Archgard Optima 45 - 3 Specifications download pdf (Page 12)

45-DVFS28N-2 12

APPROVED VENT COMPONENTS

For best and safe venting performance, here are some general venting rules:

 Use only Archgard or Simpson Dura-Vent direct vent systems and components.

 Maintain a minimum of 1” (25 mm) clearance to combustibles from the outside surfaces of

vertical vents and minimum of 1” (25 mm) sides and bottom, and 2” (50 mm) from top surfaces

of horizontal vents.

 Observe local code restrictions, if any, regarding the installation of this type of gas appliance.

 Observe the venting charts given in this manual

 Use vent spacers between the inside 4” (101 mm) and outside 7” (178 mm) vents at 3 ft (915

mm) intervals (Archgard Direct Vent System ONLY).

 Never slope horizontal vents downwards, towards the vent termination.

 Maintain a minimum ¼” rise (6mm) for every linear foot (305 mm) of horizontal vent.

 Terminate (Horizontally) the vent only with an approved vent termination supplied by Archgard

Part # 999-DV-HTC or Simpson Dura-Vent Termination Cap.

 Terminate (Vertically) the vent only with Simpson Dura-Vent Vertical Termination Cap.

 Support horizontal vents every 3 ft (915 mm) to prevent sagging.

VENTING CONNECTION

The appliance will not function without being connected to a proper venting system. This appliance

may only use direct vent system supplied by Archgard, or Simpson Dura-Vent direct vent systems

with the appropriate Adaptor dependent upon the venting guidelines within this manual.

Please, strictly follow the venting instructions for optimum performance from

the appliance, and to avoid sooting and/or service calls.

PART # DESCRIPTION

45-TVKFS Archgard Top Vent Kit. Kit includes 9 ft (2.74 M) of 4” (101 mm) gas flex

liner, 36” (914 mm) of 7” (178 mm) black stove pipe, 24” (610 mm) of

7” (914 mm) black stove pipe, 90

deg. black elbow, wall sleeve, firestop

and horizontal termination cap (TK-1)

999-DV-HTC Archgard Horizontal termination head only

999-DV-SC Archgard Safety Cage for Horizontal termination head

999-DV-VSD Archgard Vinyl siding deflector

999-DV-STC Archgard Snorkel termination head only

999-DV-SDA Adapter, Appliance to Simpson Dura-Vent

NOTE: Only venting components listed below are approved for the Optima 45-3

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

No comments

Archgard Optima 45 - 3 Specifications Page 12