Archgard 72-DVT30N User Manual download pdf (Page 18)

72-DVT30N

The Optima 72 can be used with Flexmaster Model GA 4” & 7” (101mm & 178mm) vent liners,

and terminate through the roof using Simpson Dura-Vent by using an 999-DV-SDA (Adapter,

Flex to Simpson Dura-Vent).

 Refer to the venting chart before considering vertical termination.

 Check the Allowable Termination Locations chart within this manual.

CONNECTING THE 999-DV-SDA ADAPTER TO FLEX & SIMPSON DURA-VENT

Clearance to combustible material and fire-stops

must be installed as required by local codes; in the

absence of local codes, in accordance with the local

enforcing authority.

VENTING - VERTICAL TERMINATION USING FLEX GAS LINER

FLEXIBLE PIPE CONNECTIONS

1. The intake pipe must be

securely fastened to the

appliance and to the terminal

and all joints must be secured

using a minimum of 3 screws

evenly spaced around the

pipe.

2. Approximately 1” (25mm)from

the end of the 4” (101mm)

pipe outlet at the appliance

and at the 4” (101mm)

terminal inlet, apply a bead of

high temperature sealant ap-

proximately ¼” (6mm) wide.

Slide the 4” (101mm) pipe

onto the appliance and secure

with 3 screws evenly spaced

to the outlet. Repeat the

procedure at the terminal inlet.

3. Install a vent spacer between

the outer and the inner liner to

maintain clearances. Spacers

should be installed at every

change of direction and every

3 ft. (914mm).

4. See Fig. 1 & 2 to determine

where to place the 999-DV-

SDA adapter, and connect the

999–DV-SDA adaptor as

shown in Fig. 3.

5. Follow all vertical venting di-

rections as outlined in the Ver-

Connecting the SDA-U Adaptor

Slide the 4” (101mm) flex pipe over the 4” (101mm) section

of the 999-DV-SDA adapter, and secure with a bead of high

temperature silicone and 3 screws. Repeat the process for

the 7” (178mm) liner. Follow with Simpson Dura-Vent Pipe

and guidelines for installation as outlined within this manual

Flex to Roofline

4” & 7”

(101 mm &

178 mm)

Flex Liner

999-DV-

SDVTC

(991) Term

Head or

Simpson

Dura-Vent

4” & 7”

(101 mm &

178 mm)

Flex Liner

999-DV-

SDA

Simpson Dura

-Vent System

Flex to Ceiling

999-DV-

SDVTC

(991) Term

Head or

Simpson

Dura-Vent

999-DV-

SDA

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 52 53

Comments to this Manuals

No comments

Archgard 72-DVT30N User Manual Page 18

Comments to this Manuals

Related products and manuals for Stoves Archgard 72-DVT30N