Archgard 31-DVI33N Specifications download pdf (Page 15)

31-DVI33N 15

LEVELING THE 31-DVI33N

Before placing the appliance into the fireplace, check the hearth of the fireplace to see if it is

level with the front of the fireplace. If it is not, measure the depth of the hearth. Loosen the

three screws of the leveling “L” bracket at the back of the appliance. Lower it to the

measurement obtained and tighten the screws.

APPLIANCE DESCRIPTION

ELECTRICAL CONNECTIONS

The 31-DVI33N comes complete with a temperature-activated fan and rheostat installed and

wired to a three-prong (grounding) plug for your protection against shock hazard and should be

plugged in directly into a properly grounded three-prong receptacle. Do not cut or remove the

grounding prong from this plug.

NOTE: This appliance, when installed, must be electrically grounded in accordance with local

codes or, in the absence of local codes, with the National Electrical Code, ANSI / NFPA 70,

or the Canadian Electrical code, CSA C22.1.

FRONT VIEW

Ceramic

Glass with

standard

black door

frame

Surround

“Faceplate”

TOP VIEW

On/Off

Rocker

Switch

Fresh Air Intake Exhaust

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 45 46

No comments

Archgard 31-DVI33N Specifications Page 15