Archgard Optima 32-1 Specifications download pdf (Page 24)

Optima 32 - 1 24

OPTIONAL BAY DOOR INSTALLATION

CAUTION:

Only Trim kit (s) supplied by the manufacturer shall be used in the installation of this appliance.

After opening the bay door package, inspect the door to ensure that no damage has occurred

inside the package. Please report any damage immediately to your Authorized Archgard Dealer.

Installation of the Bay Door Option does not change any clearances stated on the rating

plate/ or Installation Operation and Maintenance Manual accompanying the appliance.

NOTE: Ensure that the Heater is turned off and cool.

To install this Bay Door Accessory and Knob Extension Kit use the following instructions:

1 Remove the upper grilles by pulling the assembly forward.

2 Remove the lower grilles by removing the four hex head mounting screws that secure the

brass hinges to the unit.

3 Discard the Upper and lower grilles (they are not required for Bay door installation).

4 Install the Hi/Low, On/Off and sparker extension knobs onto the corresponding knobs on the

valve.

5 Move the Bay Door over the front of the insert, line up the slots in the upper area slightly

above the corresponding tabs at the front top of the firebox, and push the assembly down.

6 Parts supplied with the kit: BBAY 32 door assembly,

308-0094 Hi/Lo Extension Knob

308-0095 On/Off Extension Knob

308-0096 Piezo Extension Knob

7 The lower (center) hinges down for control access.

WARNING: THE OPTIONAL BAY DOOR BBAY-32 IS A DECORATIVE OPTION ONLY AND IS

MANUFACTURED WITH TEMPERED GLASS. THIS UNIT MUST NOT BE OPERATED WITH-

OUT THE FLAT CERAMIC GLASS DOOR SECURED IN PLACE, BEHIND IT.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 40 41

No comments

Archgard Optima 32-1 Specifications Page 24