Archgard Optima 32-1 Specifications download pdf (Page 14)

Optima 32 - 1 14

If a wall-mounted switch or a wall-mounted thermostat is desired, Archgard recommends that

the device be wired as shown in Fig 1. This will allow the original on/off rocker switch to be

used in case the device that is mounted to the wall becomes inoperable.

Note: Archgard Industries does not manufacture or sell any wall switch or wall thermostat, and

will not extend warranty to them.

OPTIONAL WALL SWITCH OR THERMOSTAT

Thermostat / wall switch wire table

Recommended Maximum Lead Length

for two wires.

Wire Size Max. Length

14 GA. 50 Ft. (15.24 M)

16 GA. 32 Ft. (9.75 M)

18 GA. 20 Ft. (6.9 M)

20 GA. 12 Ft. (3.65 M)

22 GA. 9 Ft. (2.74 M)

Fig. 1

SUPPLY TUBE

THERMOCOUPLE LEAD

WIRE TO

PIEZO

(SPARKER)

ON/OFF SWITCH

OPTIONAL REMOTE,

WALL SWITCH, OR WALL

THERMOSTAT

A ELECTRODE

B THERMOPILE

C PILOT CAP

D THERMOCOUPLE

PILOT ASSEMBLY

VALVE CONNECTION for MILLIVOLT VALVE

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 40 41

No comments

Archgard Optima 32-1 Specifications Page 14