Archgard Optima 32-1 Specifications download pdf (Page 8)

Optima 32 - 1 8

CLEARANCES TO COMBUSTIBLES

TOP VIEW

SIDE VIEW

Clearances to Faceplate

1” (25 mm)

Sidewalls or Mantle Supports

CAUTION: This appliance is designed for used in any masonry or factory built wood burning

fireplace. It cannot be enclosed by combustible material and used as a built-in gas fireplace.

WARNING: Failure to position the parts in accordance with these diagrams or failure to use

only parts specifically approved with this appliance may result in property damage or personal

injury or loss of life.

Combustible mantle allow in

shaded area. Mantle extension

maybe increased 1” (25 mm) for

each additional 1” (25 mm)

increase in clearance height.

Example: If using a 5” (127 mm)

reduce minimum height to

36” (914 mm).

If using a 4” (100 mm) reduce

minimum height to 35” (889 mm)

Note: With bay window

attached clearances

remain the same.

6” (152 mm)

Minimum Height

From Bottom of

Appliance: 37”

(940 mm) with a

6” (152 mm) mantel.

Note:

If existing wood fireplace

hearth protection is

removed it must be

replaced by a non

combustible hearth

protection extending

16” (406 mm) from the

front of the

fireplace insert.

Minimum 1” (25 mm)

clearance is required from the

faceplate (fireplace surround)

to a sidewall or mantle

support. See APPLIANCE

DIMENSIONS for surround

sizes.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 40 41

Comments to this Manuals

No comments

Archgard Optima 32-1 Specifications Page 8

Comments to this Manuals

Related products and manuals for Fireplaces Archgard Optima 32-1